Three Tips to Keep Your Hyundai Elantra Window Visor Working at Its Finest
Your Hyundai Elantra window visor is made from tough materials to make it capable of deflecting strong wind or rain. With this installed in your ride, you'll have no fear driving with your windows rolled down for an inch or two, knowing that rainwater and too much wind don't stand a chance at getting into your interior. You can also enjoy fresh air as well as all the conveniences of having a well-ventilated interior.
However, your window visors can also wear out due to its function as a shield against different weather conditions. Thus, you should spend time cleaning them and maintaining their tiptop condition for them to last longer. Here are some tips that can help you keep your window visors working at their best:
- Keep your window visors clean.
Regularly wash your window visors with water and mild cleaning solution. Spray the cleaner onto the surface and scrub dirt away using sponge or clean cloth. Also pay attention to the underside of the window visor. And although they are made of tough materials to resist damage, it is better to protect your visors from the harsh UV rays by using high-quality protectant. Such product can also help restore the window visor's original luster.
- Use only manufacturer-recommended cleaners and protectant.
If you're planning to use commercial products in cleaning your window visors, it is wise to check first their contents and make sure they are safe for acrylic, as this is the most common material used in making your visor. This doesn't just apply on cleaners but on protectant as well. Avoid cleaners that are ammonia-based as they can damage your window visors' tint.
- Wipe your window visors dry after washing to avoid unsightly water spots.
Do not forget to dry your window visors after washing. But instead of allowing them to dry out naturally, wipe them dry using a clean cloth. By so doing, you can avoid having unsightly water spots on the window visors' surface. If possible, use lint-free cloths as they don't have short fibers that may loosen during use and may stick on the visor's surface.
Three Tips to Remember for a Successful Hyundai Elantra Window Visor Installation Process
Your Hyundai Elantra window visor deflects wind and rainwater to prevent them from getting into your vehicle's interior as you drive with partly open windows. This accessory also helps ensure driving safety by preventing windshield fogging. If you're thinking of replacing your ride's window visor, you can save a lot by performing the installation process by yourself. Here are some tips to help you get started:
Tip #1: Clean your Hyundai Elantra before installing the window visors.
Your vehicle must be cleaned before you install the window visors. This is especially true for tape-on window visors as they are usually attached onto the upper part of the window through an automotive-grade 3M tape. If the mounting surface is filthy, dirt can interfere with the proper attachment of the visors by weakening the tape's bonding agent. To be doubly sure that the mounting surface is free of oil and grease, you can wipe it clean with using alcohol wipes or a clean cloth dabbed in rubbing alcohol.
Tip #2: Familiarize yourself with the installation process for the type of window visor you are going to install.
The installation process and the amount of time you should allot to complete the job depend on the type of visor you will be installing. There are two types of window visors that can be attached onto your Hyundai Elantra windows. These are the in-channel and the tape-on visors. The in-channel window visors have a thin flange that's inserted in the upper window channel and are secured in place by friction and additional adhesive. On the other hand, tape-on window visors have an adhesive tape and are simply attached above the window frame.
Tip #3: Do not drive your Elantra right after window visor installation.
After putting on your new set of window visors, do not drive your vehicle just yet. Instead, take time to secure the window visor into place by exerting light pressure over it. Just make sure not to apply too much pressure as that may cause the visor to crack. Give your tape or adhesive some time to securely settle on and bond with the mounting surface, so the visors won't fall off even when driving on high speeds.