Easy Solutions to Common Audi A4 Splash Shield Issues
Is your Audi A4 experiencing premature degradation? If your answer is yes, then you should install a splash shield. Attached under your vehicle, this shield serves to protect your vehicle from road salt, debris, and other corrosive elements. However, although it is built to last for a long time, this shield can still cause problems especially if it is not maintained properly. Read on to know some of the most common issues that you may encounter with your A4's splash shield.
Dull-looking splash shields
Over time, the splash shields of your Audi A4 will look dull because of road debris and other corrosive elements. Once this happens, your vehicle will look old and unappealing. As a solution, you can try restoring your splash shields by painting them. However, make sure that the paint you are going to use is designed to adhere well to the material of your shields. Also, don't forget to sand the splash shields before painting them to remove dirt and make them smooth again. If you want to fully customize the shields, you can try using stencils to paint different shapes. Just don't forget to wait for a week before reinstalling the splash shields.
Stubborn stains and spots
Because your Audi A4 splash shield is designed to protect your vehicle from premature degradation that can be caused by road salt and other corrosive elements, it's only natural that it will become dirty over time. However, the accumulated dirt and will be very difficult to remove especially if you don't have the right cleaning solution. To effectively remove splash shield stains, you need to use a tar remover that can be purchased from an auto parts store. Just be careful when applying this stain remover because it can damage your vehicle's paint job.
Another problem that you may encounter with your A4's splash shield is having loose sections. Once this happens, your vehicle will not receive the best protection. What's more, you may hear ratting noises under your vehicle because the loose section of the shield is hitting other parts of your vehicle. To solve this, you need to tighten the bolts or screws that are holding the splash shield in place. In case it is secured through clips, then you need to replace the clips if they are missing.
What to Do to Make Your Audi A4 Splash Shield Last
The splash shield installed on your Audi A4 will only give the best protection if you will take care of it properly. This is because even though it is designed to withstand extreme temperatures and constant exposure to road debris, it will still get damaged over time. So, to get the most out of your splash shield, follow the simple maintenance tips that we listed below:
Clean your Audi A4 splash shield routinely.
Although the splash shield is designed to protect your vehicle from road salt, mud, and other kinds of road debris, it will still need routine maintenance so it will last for a long time. However, you can't do this by simply washing it with soap and water. In fact, you need to use the right cleaning solutions to remove dirt and stains effectively. In case there are stubborn stains, then you can dab some vinegar on the splash shield to clean it.
Inspect your splash shield for cracks and other signs of damage periodically.
Over time, your Audi A4 splash shield will get damaged due to road debris and other corrosive elements. Once this happens, your vehicle will not be protected, and some of its vital parts will become corroded. To prevent this, make sure that you will inspect your splash shield periodically. However, in case it is damaged, you need to replace it immediately because attempting to repair it will only cause more problems.
Repaint the splash shield when it already looks worn out.
One of the best ways to get the most out of your splash shield is by repainting it periodically or when it already looks dull. Luckily, this can be done at home, and you only need a splash shield kit and paint to accomplish the task. Just make sure that the paint you are going to use is designed to work well with the material used on your splash shield. Also, if you want to fully customize this part, you can try using different paint colors and stencils to trace different shapes. But, if you will do this, don't forget to allow the paint to dry for a week before reinstalling the splash shield.